Husqvarna 3120XP Manuale Utente

EEEEnnnngggglllliiiisssshhhh 3120XP Operator ′ s manual Please read the operator’s manual carefully and make sure youunderstand the instructions bef

10 – English SAFETY INSTRUCTIONS • Chain pitch (inches). The spacing between the drive links of the chain must match the spacing of the teeth on the

English – 11SAFETY INSTRUCTIONSIt is very difficult to sharpen a chain correctly without the right equipment. We recommend that you use our file gauge.

12 – EnglishSAFETY INSTRUCTIONSTensioning the chainThe more you use a chain the longer it becomes. It is therefore important to adjust the chain regul

English – 13SAFETY INSTRUCTIONSIf the chain lubrication is not working:• Check that the oil channel in the bar is not obstructed. Clean if necessary.•

14 – EnglishSAFETY INSTRUCTIONS• Whether the tip of the bar is uneven or badly worn. If a hollow forms on the underside of the bar tip this is due to

English – 15SAFETY INSTRUCTIONS4 Never use the chain saw above shoulder height and try not to cut with the tip of the bar. Never use the chain saw one

16 – EnglishSAFETY INSTRUCTIONSBefore use:1 Check that the chain brake works correctly and is not damaged. See the instructions under the heading Chec

English – 17SAFETY INSTRUCTIONSTransport and storage• Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into co

18 – EnglishSAFETY INSTRUCTIONSBasic cutting techniqueGeneral• Always use full throttle when cutting!• Reduce the speed to idle after every cut (runni

English – 19SAFETY INSTRUCTIONSFinish by cutting from above so that the two cuts meet.The log is supported at both ends. There is a high risk that the

2 – English KEY TO SYMBOLS Key to symbols WARNING! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to t

20 – EnglishSAFETY INSTRUCTIONSClearing the trunk and preparing your retreatRemove any branches that are in the way. To do this it is best to work fro

English – 21SAFETY INSTRUCTIONSWe recommend that you use a bar that is longer than the diameter of the tree, so that you can make the felling cut and

22 – EnglishWHAT IS WHAT?What is what on the chain saw?23131415171819202122116232624579101146128282927Husqvarna XXXHusqvarna ABHuskvarna, SWEDENXXXXXX

English – 23ASSEMBLYFitting the bar and chainCheck that the chain brake is in disengaged position by moving the front hand guard towards the front han

24 – EnglishFUEL HANDLINGFuelCAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stro

English – 25FUEL HANDLINGFuellingClean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at

26 – EnglishSTARTING AND STOPPINGStarting and stoppingCold engineStarting: The chain brake must be engaged when the chain saw is started. Activate the

English – 27STARTING AND STOPPINGStoppingStop the engine by switching off the ignition. (Move the ignition switch to stop position.)

28 – EnglishMAINTENANCECarburettorYour Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the

English – 29MAINTENANCEHigh speed jet HThis chain saw is equipped with a carburettor that has a built-in fixed high speed jet.CAUTION! There is an inte

English – 3 CONTENTS ContentsBefore using a new chain saw • Please read the operator’s manual carefully.• Check that the cutting equipment is correc

30 – EnglishMAINTENANCE• Lubricate the recoil spring with light oil. Fit the pulley and tension the recoil spring.Fitting the starter• To fit the start

English – 31MAINTENANCECAUTION! The mesh must be replaced if it is damaged. If the mesh is blocked the machine will overheat and this will cause damag

32 – EnglishMAINTENANCEDaily maintenance1 Check that the components of the throttle control work safely. (Throttle lock and throttle control.)2 Clean

English – 33TECHNICAL DATATechnical dataNote 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/

34 – EnglishTECHNICAL DATA´®z+H<T¶6V¨´®z+H<T¶6V¨Bar and chain combinationsThe following combinations are CE approved.Bar ChainLength, inches Pit

English – 35TECHNICAL DATAEC-declaration of conformity(Applies to Europe only)Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares u

´®z+H<T¶6V¨2004-10-11´®z+H<T¶6V¨1140285-26

4 – English SAFETY INSTRUCTIONS Personal protective equipment • Protective helmet• Hearing protection• Protective goggles or a visor• Gloves with sa

English – 5 SAFETY INSTRUCTIONS Chain brake and front hand guard Your chain saw is equipped with a chain brake that is designed to stop the chain im

6 – English SAFETY INSTRUCTIONS Throttle lock The throttle lock is designed to prevent accidental operation of the throttle control. When you press

English – 7 SAFETY INSTRUCTIONS For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machin

8 – English SAFETY INSTRUCTIONS • Press the throttle lock and make sure it returns to its original position when you release it.• Check that the thr

English – 9 SAFETY INSTRUCTIONS Cutting equipment This section describes how to choose and maintain your cutting equipment in order to:• Reduce the